Peter Tkach

Harpsichord Maker

#10 Go-bars

Contents

Home
Up
#1 Tail to Spine
#2 Front End
#3 Bentside
#4 Corner Keys
#5 Braces
#6 Sound Board Slats
#7 Glued Soundboard Slats
#8 Fitted Soundboard
#9 Rough-cut Bridges
#10 Go-bars
#11 Bridges Glued to Soundboard
#12 Lid and Flap Are Fitted
#13 Liners
#14 Six Upper Frames
#15 Bottom Fitted
#16 Soundboard Bottom
#17 Gilding the Rose
#18 Sunbathing
#19 Soundboard and Go-bars
#20 In the White
#21 Key Blanks and Frames
#22 Marked Key Blanks
#23 Natural Platings
#24 Keys Are Cut
#25 Arcades Are Glued
#26 Natural Keys
#27 Keys Mounted
#28 Back of Keys
#29 Instrument Strung
#30 Sharp Keys
#31 All Keys Finished and Mounted
#32 Completed Keyboards
#33 Case Moldings Gilded

If you are interested in art or musical instruments, be sure to read more about the presented instrument, and also engage mba essay writers to broadcast your ideas or thoughts to society. Go-bars against the ceiling clamp the bridges to the soundboard. The six table legs have car jacks attatched so that the table height can be adjusted for the various go-bar gluing operations.