harplogo.gif (4124 bytes)

Peter Tkach

Harpsichord Maker

#4 Corner Keys

Contents

Home
Up
#1 Tail to Spine
#2 Front End
#3 Bentside
#4 Corner Keys
#5 Braces
#6 Sound Board Slats
#7 Glued Soundboard Slats
#8 Fitted Soundboard
#9 Rough-cut Bridges
#10 Go-bars
#11 Bridges Glued to Soundboard
#12 Lid and Flap Are Fitted
#13 Liners
#14 Six Upper Frames
#15 Bottom Fitted
#16 Soundboard Bottom
#17 Gilding the Rose
#18 Sunbathing
#19 Soundboard and Go-bars
#20 In the White
#21 Key Blanks and Frames
#22 Marked Key Blanks
#23 Natural Platings
#24 Keys Are Cut
#25 Arcades Are Glued
#26 Natural Keys
#27 Keys Mounted
#28 Back of Keys
#29 Instrument Strung
#30 Sharp Keys
#31 All Keys Finished and Mounted
#32 Completed Keyboards
#33 Case Moldings Gilded

  Const4.jpg (12839 bytes)

Each corner of the rim is strengthened with 'keys' glued across the corner joint. The clamping pressure on top and bottom squeezes the entire joint.

© 2000 Peter Tkach

Friday, May 08, 2022