Peter Tkach

Harpsichord Maker

#15 Bottom Fitted

Contents

Home
Up
#1 Tail to Spine
#2 Front End
#3 Bentside
#4 Corner Keys
#5 Braces
#6 Sound Board Slats
#7 Glued Soundboard Slats
#8 Fitted Soundboard
#9 Rough-cut Bridges
#10 Go-bars
#11 Bridges Glued to Soundboard
#12 Lid and Flap Are Fitted
#13 Liners
#14 Six Upper Frames
#15 Bottom Fitted
#16 Soundboard Bottom
#17 Gilding the Rose
#18 Sunbathing
#19 Soundboard and Go-bars
#20 In the White
#21 Key Blanks and Frames
#22 Marked Key Blanks
#23 Natural Platings
#24 Keys Are Cut
#25 Arcades Are Glued
#26 Natural Keys
#27 Keys Mounted
#28 Back of Keys
#29 Instrument Strung
#30 Sharp Keys
#31 All Keys Finished and Mounted
#32 Completed Keyboards
#33 Case Moldings Gilded

The bottom is fitted and screwed and glued to the bottom edge of the case, the lower frames, and the lower belly rail. From the lower belly rail back, the grain runs the length of the instrument. In front of the rail it runs across the instrument. The two bottom pieces are joined at the belly rail with a half-lap joint.